Buell 2002 P3 - Page 164

2002 Buell P3: Engine 3-17
HOME
10. See Figure 3-28. Install rear motor mount bolts.
a. Apply several drops of LOCTITE
®
THREAD-
LOCKER 262 (red) to last few threads.
b. Tighten to 30-33 ft-lbs (41-45 Nm).
11. See Figure 3-29. Connect feed, return, transmission and
crankcase vent lines.
Figure 3-27. Hoisting Bike
Figure 3-28. Installing Rear Motor Mount Bolts
Figure 3-29. Connect Lines
7650
7623
7634
1. Oil return
2. Transmission vent
3. Crankcase vent
4. Feed
4
2
1
3