Problem
Solution
CO
Sound is distorted.
When recording near loud sounds (such as fireworks
or
-
concerts), sound may become distorted. This is not a
malfunction.
A vertical light bar appears
on
Bright light in a dark scene may cause a vertical light bar
-
the screen. (smear) to appear. This is not a malfunction.
Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever.
24
Cannot edit
or
delete scenes. Remove the disc protection.
90
Scenes cannot be deleted
in
a DVD-R disc
or
a DVD-RW disc
-
recorded
in
VIDEO mode.
You
cannot edit or delete scenes on a disc that was protected
-
in
another digital device.
Cannot add scenes to the
The disc is full
("
e>
END" flashes
on
the screen). Delete some
31
playlist. recordings (DVD-RW in VR mode) to free some space
or
87
replace the disc.
Cannot divide the scene.
You
cannot edit
or
delete scenes on a disc that was protected -
in
another digital device.
Cannot edit the disc title.
You
cannot add a title to a DVD-R disc after it was finalized.
98
You
cannot add recordings or edit the disc title
on
a DVD-RW
101
disc after
it
was finalized. Unfinalize the disc first.
You
may not
be
able to edit the title if you entered it with
-
another digital device.
Disc is protected. Cancel the disc protection or replace the
90
disc.
Cannot create a Photomovie
There are no still images recorded on the disc.
-
scene.
The disc is full
("
e>
END" flashes
on
the screen). Delete some
31
recordings (DVD-RW in VR mode) to free some space
or
87
replace the disc.
Playback
Problem
Solution
[IJ
Pressing the playback button Set the camcorder to
IPLAY···~l
. 39
does not start playback.
Load a disc.
31
You
may not
be
able to play with this camcorder discs
-
recorded or edited with other DVD recorders
or
computer DVD
drives.
Verify that the disc is inserted with the label side facing up.
31
During playback there is The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 133
video noise, the sound is
You
may not be able to play with the camcorder discs
-
distorted
orthe
disc cannot be
recorded
or
edited with other DVD recorders
or
computer DVD
read.
drives.
Image will not appear
on
the
Check the connections and make sure the
TV
or
VCR is set to 102
TV
screen. the correct input signal.
There is a brief stop between Depending
on
the DVD player, there might be a very short
-
scenes. stop between scenes during playback.
Disc is running, but image will
TVNlDEO
selector
on
the TV is not set to VIDEO. Set the 102
not appear on the
TV
screen. selector to VIDEO.
You
attempted to play back
or
dub
an
incompatible disc. Stop
-
playback/dubbing.
No sound from the built-in Speaker volume is turned off. Adjust the volume from the
43
speaker.
[SYSTEM SETUP] menu
in
the
(PLAY"~)
mode.
-I
(3
t::
0-
lD
•
..>
-
125
To Next Page
