Canon MF726Cdw - Page 288

COPIER > FUNCTION > CLEAR
Item Description
Related service mode COPIER > FUNCTION > INSTALL > E-RDS, RGW-PORT, COM-LOG
Supplement/memo Embedded-RDS: Function to send device information such as the device counter, failure, and consumables
to UGW via SOAP protocol UGW (Universal Gate Way):
Remote monitoring service system
■ MISC-R
COPIER > FUNCTION > MISC-R
Item Description
SCANLAMP
Title Lighting check of CIS Unit LED
Details To light up CIS Unit LED for 3 seconds. It lights up in the order of R, G, B, R, G and B.
Use case When replacing the CIS Unit LED
Adj/set/operate method Select the item, and then press Yes key.
Display/adj/set range 0 to 1
Default value 0
Required time 3 seconds
SCAN-ON
Title Execution of copyboard reading
Details To execute reading of the original on the Copyboard Glass.
Adj/set/operate method 1. Place paper on the Copyboard Glass.
2. Select the item, and then press Yes key.
Display/adj/set range 0 to 1
Default value 0
■ MISC-P
COPIER > FUNCTION > MISC-P
Item Description
SRVC-DAT *
Title Output of system data list/system dump list
Details To execute report output of the system data list and the system dump list.
System data list: The service software switches and parameters used in FAX function System dump list:
The number of sends/receives, the number of pages sent/received, the number of sheets printed / read,
the number of errors, etc.
Adj/set/operate method Select the item, and then press Yes key.
SYS-DAT *
Title Output of system data list
Details To execute report output of the system data list.
The service software switches and parameters used in FAX function are output.
Adj/set/operate method Select the item, and then press Yes key.
SYS-DMP *
Title Output of system dump list
Details To execute report output of the system dump list.
The number of sends/receives, the number of pages sent/received, the number of sheets printed/read,
the number of errors, etc. are output.
Adj/set/operate method Select the item, and then press Yes key.
CNTR
Title Output of counter report
Details To output the counter report.
The usage of functions (reading, recording, communication and copy) is output.
Adj/set/operate method Select the item, and then press Yes key.
ERR-LOG
Title Output of error log report
8. Service Mode
280