Canon MF726Cdw - Page 315

■ AUTO RX
● Numeric value parameter
Parameter No. Function Setting range
01; CI ON time 0 to 9999 (x 10 msec)
02; CI LONG ON time 0 to 9999 (x 10 msec)
03; CI OFF time 0 to 9999 (x 10 msec)
04; CI LONG OFF time 0 to 9999 (x 10 msec)
05; CI MAX OFF time 0 to 9999 (x 10 msec)
06; CI WAIT time 0 to 9999 (x 10 msec)
07; CI frequency 0 to 9999 (cycle)
08; CI frequency lower limit 0 to 9999 (Hz)
09; CI frequency upper limit 0 to 9999 (Hz)
■ CNG DETECT
● Numeric value parameter
Parameter No. Description Setting range
01; At F/T switching CNG MIN ON time 0 to 9999 (x10 msec)
02; CNG MAX ON time 0 to 9999 (x 10 msec)
03; - -
04; - -
05; - -
06; - -
07; At direct connecting to answering
phone
CNG MIN ON time 0 to 9999 (x 10 msec)
08; CNG MAX ON time 0 to 9999 (x 10 msec)
09; Tolerable time of instantaneous interrup-
tion
0 to 9999 (x 10 msec)
10; - -
11; Number of detection 0 to 9999 (times)
12; Hit ratio 0 to 9999 (%)
■ RKEY
● Numeric value parameter
Parameter No. Function Setting range
01; Connection time of flash 0 to 9999 (x 10 msec)
02; Connection time of grounding wire 0 to 9999 (x 10 msec)
■ PBX DIAL TONE 1
Not in use
■ PBX BUSY TONE
Not in use
8. Service Mode
307