Canon MF726Cdw - Page 76

■ Procedure for Export/Import Using Remote UI ([System Management Settings]
Menu)
● Procedure for Export Using Remote UI ([System Management Settings] Menu)
Service mode setting information can be exported from the [System Management Settings] menu by setting the following
service mode setting value to "1".
1. Enter service mode, and set the following item to "1".
• COPIER > OPTION > USER > SMD-EXPT
TNRB-SW : 0
SCALL-SW : 0
SCALLCMP : 0
PC-MODE : 0
SMD-EXPT : 1
NOTE:
The [SMD-EXPT] setting can be specified either from the Control Panel or from the remote UI.
2. Exit service mode, and start the remote UI and log on in System Manager Mode.
3. Click [Settings/ Registration].
4. Click[Import/Export] > [Export].
2. Technical Explanation
68