Getting Started
Connecting to the Switch
ESW 500 Series Switches Administration Guide 14
1
STEP 1 Power on the ESW 500 series switch.
STEP 2 Connect one of the designated uplink ports on the ESW 500 series switch to the
expansion port on the UC520 or one of the switch ports on the SR520.
STEP 3 Connect the PC with CCA installed to any access switch port on the ESW 500 or
alternately, the UC500 or Small Business Pro router.
STEP 4 Launch CCA. To verify you have CCA version 2.2 or higher, click Help > About.
The
version page
opens.
CCA Version page
STEP 5 Connect to an existing community, or create a new one. For more information on
how to create a community, refer to the "How to create a CCA community" VOD at
https://www.myciscocommunity.com/docs/DOC-
1423#UC500_System_Level_Features
To Next Page
Loading...
