Getting Started
Connecting to the Switch
ESW 500 Series Switches Administration Guide 15
1
Connect page
STEP 6 Once you have connected to the community, the
Topology View
opens and
displays the ESW 500 Series Switch. Right-click on the switch and it displays
three options:
• Device Manager
• Properties
• Annotation
You can now continue with configuring the switch by two different options; use
CCA to do all of the configuration, or use the Device Manager to go to the
switch Configuration Utility. Additional information is described in detail in the
appropriate CCA user documentation. This procedure uses the Device
Manager.
To Next Page
Loading...
