Cisco ESW 500 - Defining SNMP Groups

Configuring SNMP
Configuring SNMP Security
ESW 500 Series Switches Administration Guide 341
13
STEP 1 Click Monitor & Device Properties > SNMP > Security > Groups. The SNMP
Groups Page
opens:
SNMP Groups Page
The
SNMP Groups Page contains the following fields:
• Group Name — Displays the user-defined group to which privileges are
applied.
• Security Model — Defines the SNMP version attached to the group. The
possible field values are:
- SNMPv1 — SNMPv1 is defined for the group.
- SNMPv2 — SNMPv2 is defined for the group.
- SNMPv3 — SNMPv3 is defined for the group.
• Security Level — Defines the security level attached to the group. Security
levels apply to SNMPv3 only. The possible field values are:
- No Authentication — Indicates that neither the Authentication nor the
Privacy security levels are assigned to the group.
- Authentication — Authenticates SNMP messages, and ensures the
SNMP messages origin is authenticated.