Cisco ESW 500 - Page 353

Configuring SNMP
Configuring SNMP Security
ESW 500 Series Switches Administration Guide 342
13
- Privacy — Encrypts SNMP message.
• Operation — Defines the group access right, which are per view. The possible
field values are:
- Read — The management access is restricted to read-only, and
changes cannot be made to the assigned SNMP view.
- Write — The management access is read-write and changes can be
made to the assigned SNMP view.
- Notify — Sends traps for the assigned SNMP view.
STEP 2 Click the Add button. The Add SNMP Group Profile Page opens:
Add SNMP Group Profile Page
The
Add SNMP Group Profile Page allows network managers to define new
SNMP Group profiles. The
Add SNMP Group Profile Page contains the following
fields:
• Group Name — Defines the user-defined group to which privileges are
applied. The field range is up to 30 characters.
• Security Model — Defines the SNMP version attached to the group. The
possible field values are:
- SNMPv1 — SNMPv1 is defined for the group.
- SNMPv2 — SNMPv2 is defined for the group.
- SNMPv3 — SNMPv3 is defined for the group.
• Security Level — Defines the security level attached to the group. Security
levels apply to SNMPv3 only. The possible field values are: