Cisco ESW 500 - Page 433

Aggregating Ports
Configuring LACP
ESW 500 Series Switches Administration Guide 422
18
Modify LACP Parameter Settings
STEP 1 Click VLAN & Port Settings > Port Management > LACP. The LACP Page opens:
STEP 2 Click the Edit button. The Edit LACP Page opens:
Edit LACP Page
The
Edit LACP Page contains the following fields:
• Port — Defines the port number to which timeout and priority values are
assigned.
• LACP Port Priority — Defines the LACP priority value for the port. The field
range is 1-65535.
• LACP Timeout — Administrative LACP timeout. The possible field values are:
- Short — Defines a short timeout value.
- Long — Defines a long timeout value. This is the default value.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The LACP Parameters settings are modified, and the device is
updated.