Cisco SCE8000 Configuration Guide

Contents
x
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
How to Disable Link Failure Reflection on All Ports 7-7
Configuring Link Failure Reflection in Linecard-Aware Mode 7-8
How to Enable Linecard-Aware Mode 7-8
How to Disable Linecard-Aware Mode 7-8
Asymmetric Routing Topology 7-9
Asymmetric Routing and Other Service Control Capabilities 7-9
Enabling Asymmetric Routing 7-10
Monitoring Asymmetric Routing 7-10
Monitoring Asymmetric Routing: Example 7-10
Configuring a Forced Failure 7-11
How to Force a Virtual Failure 7-11
How to Exit from a Virtual Failure 7-11
Configuring the Failure Recovery Mode 7-11
Options 7-12
Configure the Failure Recovery Mode: Examples 7-12
Configuring the SCE Platform/SM Connection 7-12
Configuring the Behavior of the SCE Platform in Case of Failure of the SM 7-13
Options 7-13
Configuring the SM-SCE Platform Connection Timeout 7-13
Options 7-13
CHAPTER 8 Raw Data Formatting: The RDR Formatter and NetFlow Exporting 8-1
RDR Formatter and NetFlow Exporting Support 8-1
The RDR Formatter 8-1
NetFlow 8-2
NetFlow Terminology 8-2
NetFlow Exporting Support 8-3
Data Destinations 8-3
Categories 8-4
Priority 8-5
Setting DSCP for NetFlow 8-5
Forwarding Modes 8-5
Protocol 8-6
Transport Type 8-6
Configuring Data Destinations and Categories 8-6
Configuringa Data Destination 8-6
Options 8-6
Configuring the Data Destinations: Examples 8-7
Configuring the Data Categories 8-7

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English