Cisco SCE8000 Configuration Guide

8-16
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 8 Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Displaying Data Destination Configuration and Statistics
Displaying Data Destination Configuration and Statistics
• How to the Display the Current RDR Formatter Configuration, page 8-16
• How to the Display the Current RDR Formatter Statistics, page 8-17
The following commands can be used to display the RDR formatter configuration and statistics:
• show rdr-formatter
• show rdr-formatter connection-status
• show rdr-formatter counters
• show rdr-formatter destination
• show rdr-formatter enabled
• show rdr-formatter forwarding-mode
• show rdr-formatter rdr-mapping
• show rdr-formatter statistics
• show rdr-formatter protocol NetFlowV9 dscp
Refer to the Cisco SCE8000 CLI Command Reference for a complete description of the other show
rdr-formatter commands.
How to the Display the Current RDR Formatter Configuration
The system can display the complete data destination configuration, or just specific parameters.
Step 1 From the SCE> prompt, type show rdr-formatter and press Enter.
Displays the current RDR formatter configuration.
Displaying the RDR Formatter Configuration: Example
The following example shows how to display the current RDR formatter configuration.
SCE#show rdr-formatter
Status: enabled
Connection is: up
Forwarding mode: redundancy
Connection table:
-------------------------------------------------------------------------|
Collector | Port|Status| Priority per Category: |
IP Addres / | | |-----------------------------------------------|
Host-Name | | |Category1 |Category2 |Category3 |Category4 |
-------------------------------------------------------------------------|
10.1.1.205 |33000|Up |100 primary|100 primary|100 primary|100 primary|
10.1.1.206 |33000|Down |60 |60 |60 |60 |
10.12.12.12 |33000|Up |40 |40 |40 |40 |
-------------------------------------------------------------------------|
RDR: queued: 0 , sent:4460807, thrown: 0, format-mismatch:0
UM: queued: 0 , sent: 0, thrown: 0
Logger: queued: 0 , sent: 39, thrown: 0
Errors: thrown: 0
Last time these counters were cleared: 20:23:05 IST WED March 14 2007

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English