Cisco SCE8000 Configuration Guide

11-14
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 11 Managing the SCMP
Monitoring the SCMP Environment
How to display the general SCMP configuration
Step 1 From the SCE> prompt, type show scmp and press Enter.
Example
SCE>show scmp
SCMP enabled: yes
Keep-alive interval: 5 seconds
Loss of synchronization timeout: 90 seconds from disconnection
Reconnection interval: 30 seconds
Force subscriber on a single SCE: no
Peer sends subscriber data on session start
Subscriber Id structure: GUID
How to display the configuration all currently defined SCMP peer devices
Step 1 From the SCE> prompt, type show scmp all and press Enter.
How to display the configuration for a specified SCMP peer device
Step 1 From the SCE> prompt, type show scmp name device-name and press Enter.
Example
SCE>show scmp name isg
SCMP Connection 'isg' status:
10.56.208.91 auth-port 1812 acct-port 1813
Connection state: Connected
Peer protocol-version: 1.0
Keep-alive interval: 5 seconds
Force single SCE: No
Send session start: Yes
Time connected: 9 seconds
How to display the statistics for all SCMP peer devices
Step 1 From the SCE> prompt, type show scmp all counters and press Enter.

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English