Cisco SCE8000 Configuration Guide

5-39
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 5 Configuring the Management Interface and Security
Configuring Time Clocks and Time Zone
Displaying the Calendar Time
Step 1 From the SCE(config)# prompt, type show calendar and press Enter.
Displaying the Calendar Time: Example
The following example shows the current system calendar.
SCE#show calendar
12:50:03 UTC MON May 11 2007
sce#
Setting the System Clock
Options
The following option is available:
• time-date the time and date you want to set, in the following format:
hh:mm:ss day month year
Step 1 From the SCE# prompt, type clock set time-date and press Enter.
Sets the system clock to the specified time and date.
Setting the System Clock: Example
The following example shows how to set the clock to 20 minutes past 10 AM, May 13, 2007, updates
the calendar and then displays the time.
SCE#clock set 10:20:00 13 may 2007
SCE#clock update-calendar
SCE#show clock
10:21:10 UTC THU May 13 2007
Setting the Calendar
The calendar is a system clock that continues functioning even when the system shuts down.
Options
The following option is available:
• time-date —the time and date you want to set, in the following format:
hh:mm:ss day month year

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English