Cisco SCE8000 Configuration Guide

9-10
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 9 Managing Subscribers
Monitoring Subscribers
How to Import Anonymous Groups
Options
The following option is available:
• filename — name of the csv file.
Step 1 From the SCE(config if)# prompt, type subscriber anonymous-group import csv-file filename and
press Enter.
Creates anonymous groups by importing anonymous subscribers from the specified csv file.
Imported anonymous subscriber information is added to the existing anonymous subscriber information.
It does not overwrite the existing data.
The SCE platform can support a maximum of 1000 anonymous groups.
How to Export Anonymous Groups
Options
The following option is available:
• filename — name of the csv file.
Step 1 From the SCE(config if)# prompt, type subscriber anonymous-group export csv-file filename and
press Enter.
Exports all existing anonymous groups to the specified csv file.
Monitoring Subscribers
• How to Monitor the Subscriber Database, page 9-11
• Displaying Subscribers, page 9-12
• How to Display Subscriber Information, page 9-17
• Displaying Anonymous Subscriber Information, page 9-19
The CLI provides several commands that allow you to monitor subscribers. These commands can be used
to display information regarding the following:
• Subscriber Database
• All subscribers meeting various criteria
• Individual subscriber information, such as properties and mappings
• Anonymous subscribers

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English