9-8
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 9 Managing Subscribers
Removing Subscribers and Templates
How to Remove All Introduced Subscribers
Step 1 From the SCE(config if)# prompt, type no subscriber all and press Enter.
Removes all introduced subscribers.
How to Remove a Specific Anonymous Subscriber
Options
The following option is available:
• group-name — the name of the anonymous subscriber group to be removed
Step 1 From the SCE(config if)# prompt, type no subscriber anonymous-group name group-name and press
Enter.
Removes the specified anonymous subscriber group.
How to Remove All Anonymous Subscriber Groups
Step 1 From the SCE(config if)# prompt, type no subscriber anonymous-group all and press Enter.
Removes all anonymous subscriber groups.
How to Remove All Anonymous Subscribers
Step 1 From the SCE# prompt, type clear interface linecard 0 subscriber anonymous all and press Enter.
Removes all anonymous subscribers.
Note The clear subscriber anonymous command is a Privileged Exec command.
To Next Page
Loading...
