Cisco SCE8000 Configuration Guide

9-9
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 9 Managing Subscribers
Importing and Exporting Anonymous Groups
How to Remove All Subscriber Templates
Step 1 From the SCE(config if)# prompt, type default subscriber template all and press Enter.
Removes all subscriber templates.
All anonymous subscribers will be assigned to the default subscriber template.
How to Remove Subscribers by Device
• How to Remove Subscribers from the SM, page 9-9
• How to Remove Subscribers from a Specified SCMP Peer Device, page 9-9
You can remove all subscribers managed by a specified device. The device can be either of the following:
• The SM
• A specified SCMP peer device
How to Remove Subscribers from the SM
Step 1 From the SCE(config if)# prompt, type no subscriber sm all and press Enter.
Clears all subscribers from the SM.
How to Remove Subscribers from a Specified SCMP Peer Device
Options
The following option is available:
• peer-device-name — the name of the SCMP peer device from which to clear the subscribers.
Step 1 From the SCE(config if)# prompt, type no subscriber scmp name peer-device-name all and press
Enter.
Clears all subscribers from the specified SCMP peer device.
Importing and Exporting Anonymous Groups
• How to Import Anonymous Groups, page 9-10
• How to Export Anonymous Groups, page 9-10

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English