A-4
Cisco SCE8000 Software Configuration Guide, Release 3.1.6S
OL-16479-01
Appendix A Cisco Service Control MIBs
Loading MIBs
Loading MIBs
It is important to load the MIBs in the proper order.
Before loading any new CISCO-SERVICE-CONTROL MIB, load the following MIBs in this order:
1. SNMPv2-SMI.my
2. SNMPv2-CONF.my
3. SNMPv2-TC.my
4. SNMP-FRAMEWORK-MIB.my
5. ENTITY-MIB.my
6. INET-ADDRESS-MIB.my
7. CISCO-SMI.my
8. CISCO-TC.my
Loading procedure for standard MIBs and other legacy Cisco MIBs is explained here:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2
pcube to Cisco MIB Mapping
This section is an overview of how the former pcube MIB maps to the current Cisco MIBs. Two P-cube
MIBs are mapped; PcubeSeMIB and PcubeEngageMIB (CISCO-SCABB-MIB).
Table A-4 Overall tree structure: related objects
Pcube Object Name New MIB Object Name/MIB Name
pcube CISCO-SERVICE-CONTROL or
cServiceControl
pcubeProducts ciscoMgmt
pcubeModules Removed
pcubeSeMIB See Table A-5 on page A-4
Table A-5 PcubeSeMIB
PcubeSEMIB Group Name New MIB Object Name/MIB Name
pcubeSeMIBpcubeModuleGroup cServiceControlMIB
pcubeSeConformance cServiceControlNotifs
pcubeSeGroups cServiceControlObjects
pcubeSystemGroup ENTITY and ENTITY-EXTENTION MIBs
pcubeChassisGroup ENTITY and ENTITY-EXTENTION MIBs
pcuebModuleGroup ENTITY and ENTITY-EXTENTION MIBs
pcubeLinkGroup CISCO-SERVICE-CONTROL-LINK-MIB
pcubeDiskGroup HOST-RESOURCES-MIB
To Next Page
Loading...
