Cisco SCE8000

9-22
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 9 Managing Subscribers
Configuring Subscriber Aging
How to Disable Aging for Introduced Subscribers
Step 1 From the SCE(config if)# prompt, type no subscriber aging introduced and press Enter.
How to Set the Aging Timeout Period for Anonymous Group Subscribers
Options
The following option is available:
• aging-time — the time interval, in minutes, after which an inactive subscriber sill be aged.
Step 1 From the SCE(config if)# prompt, type no subscriber aging anonymous timeout aging-time and press
Enter.
How to Set the Aging Timeout Period for Introduced Subscribers
Options
The following option is available:
• aging-time — the time interval, in minutes, after which an inactive subscriber will be aged.
Step 1 From the SCE(config if)# prompt, type no subscriber aging introduced timeout aging-time and press
Enter.
How to Display Aging for Anonymous Group Subscribers
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber aging anonymous and press Enter.
How to Display Aging for Introduced Subscribers
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber aging introduced and press Enter.