Cisco SCE8000 Configuration Guide

xviii
Cisco SCE8000 Software Configuration Guide, Release 3.1.6S
OL-16479-01
Preface
Related Publications
Your SCE platform and the software running on it contain extensive features and functionality, which
are documented in the following resources:
• For further information regarding the Service Control CLI and a complete listing of all CLI
commands, refer to the Cisco SCE8000 CLI Command Reference
• For initial installation and startup information, refer to the relevant quick start guide:
– Cisco SCE8000 Quick Start Guide
5 Configuring the Management
Interface and Security, page 5-1
Explanation of how to configure the various
management options: Telnet, SSH, and SNMP.
Also how to configure the system time, Domain
Name Settings, management IP address, and
passwords.
6 Configuring the Line Interface,
page 6-1
Explanation of how to configure tunneling, TOS
marking, and traffic rules.
7 Configuring the Connection, page 7-1 Explanation of how to configure the connection
mode, link mode, and failure behaviors
8 Raw Data Formatting: The RDR
Formatter and NetFlow Exporting,
page 8-1
Explanation of how to configure the connection
mode, link mode, and failure behaviors.
9 Managing Subscribers, page 9-1 Explanation of how to import and export
subscriber information and how to monitor
subscribers.
10 Identifying and Preventing
Distributed-Denial-Of-Service
Attacks, page 10-1
Explanation of how to configure attack filtering
11 Managing the SCMP, page 11-1 Explanation of Service Control Management
Protocol (SCMP), which is a protocol that
integrates the SCE platform and the ISG
(Intelligent Service Gateway) functionality of the
Cisco routers. It also explains how to configure
and manage SCMP, SCMP peer devices and the
RADIUS client.
A Cisco Service Control MIBs,
page A-1
Explanation of how to map the proprietary pcube
MIB supported in previous releases to the new
MIB structure.
B Monitoring SCE Platform Utilization,
page B-1
Explanation of how to monitor SCE platforms that
are installed in real traffic.
Section Title Description

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English