Cisco SCE8000 Configuration Guide

11-10
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 11 Managing the SCMP
Configuring the SCMP
How to Define an SCMP Peer Device
Options
The following options are available:
• peer_device_name — User-assigned name of the SCMP peer device
• radius_hostname — IP address or host-name of the RADIUS host (if a host-name is used, it must be
valid at time of the configuration)
• shared_secret — RADIUS shared secret
• auth-portnumber (optional) — authorization port number
• acct-portnumber (optional) — accounting port number
Defaults:
• auth-port# — 1812
• acct-port# — 1813
Step 1 From the SCE(config)# prompt, type scmp name peer_device_name radius radius_hostname secret
shared_secret [auth-port auth-portnumber acct-port acct-portnumber] and press Enter.
How to Assign the SCMP Peer Device to an Anonymous Group
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Options
The following options are available:
• group-name — Name of the anonymous subscriber group to be associated with the specified SCMP
peer device.
• range (optional) — IP range defined for the anonymous group
• template (optional) — group template assigned to the anonymous group
• peer-device-name — User-assigned name of the SCMP peer device
Step 1 From the SCE(config if)# prompt, type subscriber anonymous-group name group-name IP-range
range
[template template] scmp name peer-device-name and press Enter.
How to Remove an Anonymous Group from the SCMP Peer Device
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Step 1 From the SCE(config if)# prompt, type no subscriber anonymous-group name group-name and press
Enter.

Cisco SCE8000 Specifications

General

Brand	Cisco
Model	SCE8000
Category	Network Hardware
Language	English