Cisco SCE8000

A-16
Cisco SCE8000 Software Configuration Guide, Release 3.1.6S
OL-16479-01
Appendix A Cisco Service Control MIBs
pcube to Cisco MIB Mapping
tpCpuUtilization 1.3.6.1.4.1.5655.4.1.9.1.
1.35
CISCO-PROCESS-
MIB
cpmCPUTotal1minR
ev
cpmCPUTotal5minR
ev
1.3.6.1.4.1.9.9.109.1.1.1.1.7
1.3.6.1.4.1.9.9.109.1.1.1.1.8
tpCpuUtilizationPeak 1.3.6.1.4.1.5655.4.1.9.1.
1.36
Not mapped
tpCpuUtilization
PeakTime
1.3.6.1.4.1.5655.4.1.9.1.
1.37
Not mapped
tpFlowsCapacity
Utilization
1.3.6.1.4.1.5655.4.1.9.1.
1.38
CISCO-SERVICE-
CONTROL-
TP-STATS-MIB
cscTpFlowsCapacity
Utilization
1.3.6.1.4.1.9.9.634.1.1.1.19
tpFlowsCapacity
UtilizationPeak
1.3.6.1.4.1.5655.4.1.9.1.
1.39
Not mapped
tpFlowsCapacity
UtilizationPeakTime
1.3.6.1.4.1.5655.4.1.9.1.
1.40
Not mapped
tpServiceLoss 1.3.6.1.4.1.5655.4.1.9.1.
1.41
CISCO-SERVICE-
CONTROL-
TP-STATS-MIB
cscTpServiceLoss 1.3.6.1.4.1.9.9.634.1.1.1.20
Table A-15 pportGrp (1.3.6.1.4.1.5655.4.1.10)
pcube Object Name OID New MIB New Object Name OID
pportTable 1.3.6.1.4.1.5655.4.1.1
0.1
Not mapped Information provided by
ENTITY-MIB
pportEntry 1.3.6.1.4.1.5655.4.1.1
0.1.1
Not mapped Information provided by
ENTITY-MIB
pportModuleIndex 1.3.6.1.4.1.5655.4.1.1
0.1.1.1
ENTITY-MIB entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4
pportIndex 1.3.6.1.4.1.5655.4.1.1
0.1.1.2
ENTITY-MIB Each port is uniquely defined.
Index is implied by
entPhysicalIndex or ifIndex
1.3.6.1.2.1.47.1.1.1.1.1
pportType 1.3.6.1.4.1.5655.4.1.1
0.1.1.3
RFC1213-MI
B
ifType and cevPort
Also entPhysicalVendorType can
be queried for this value.
1.3.6.1.2.1.2.2.1.3
pportNumTxQueue
s
1.3.6.1.4.1.5655.4.1.1
0.1.1.4
Not mapped
Information provided by
CISCO-QUEUE-MIB
cQIfSubqueues
pportIfIndex 1.3.6.1.4.1.5655.4.1.1
0.1.1.5
Not mapped
ifIndex mapping information
provided by
entAliasMappingTable.
Table A-14 trafficProcessorGrp (1.3.6.1.4.1.5655.4.1.9) (continued)
pcube Object Name OID New MIB New Object Name OID