cmotion cvolutionLCS - Controlling H.I.T

All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
94/112
6.6. Controlling H.I.T
You can assign the knob or a slider to control H.I.T. (Horizontal Image Translation) directly.
Unlike all other controllable axis on a cvolution system, this will not control a motor directly but
will output a pixel value via the CBUS cable and record this value along with all other meta data
to a USB device when being recorded by a camin 8M-TC.
To assign H.I.T control:
■Enter the MAIN MENU, scroll to “KNOB” or “Slider”.
■Press the MENU SELECT WHEEL to enter.
■Select “H.I.T.” from the Scale Menu and press “sel” to conrm.