All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
20/112
1.9. cvolution zoom
The cvolution zoom is an extension module of the cvolution Lens Control System and is designed
to control the zoom motor(s) with a pressure sensitive joystick. Most commonly, the cvolution
zoom can be attached directly to the cvolution hand unit for wireless operation. However, it can
also be attached to its own handle and hard wired to a camin using a CBUS cable. The zoom
control can then either be hand held, or mounted to the pan bar using a cfast-czoom bracket.
cvolution zoom module front view (display, zoom controller, buttons) & back view
cvolution zoom module top and bottom view
Note: There are two versions of the zoom unit. The layout of the older
version diers only slightly and is not pictured here.
The pan-bar zoom unit has two user buttons only, whereas all other
zoom units serve 4 buttons for individual user assignment.
LENS / USER BUTTON 1 LENS / USER BUTTON 2
To Next Page
Loading...