cmotion cvolutionLCS - Save;Load User Settings

All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
89/112
6.2. Save/Load User Settings
With every cvolution system, it is possible to save up to 7 user proles. Each prole includes:
Motor Assignment, Direction, Torque, Ramp and Scale Sync/Scale Link. These individual
proles are saved internally when using the camin 3M but can be written to a USB when stick
when working with cvolution camin 2M, 4M, 8M and 8M-TC.
NOTE: Saving multiple Scale Sync proles is particularly useful when
regularly changing paired/synchronized lenses in a 3D production.
To save a user prole:
■Press the “SELECT” button twice to enter the Menu.
■Select “User Settings“.
■Select “save“ and press “next“.
■Select one of the slots, e.g. “User1“ and press “Select“.
■Wait for “Data successfully written internally / written to USB” and press “exit”..
To save a pair of synchronized lenses to a user prole:
■First synchronize the pair of lenses as described in section 6.1.3 on page 86.
■Save your settings to a slot as described above.
■Clear ALL synchronized scales from the “SYNC” menu.
■Synchronize the second pair of lenses.
■Save the settings to another slot.
To load settings:
■Press the “SELECT” button twice to enter the Menu.
■Select “User Settings“.
■Select “load“ and press “next“.
■Select one of the slots, e.g. “User1“ and press “Select“.
■Wait for “Data successfully loaded / loaded from USB” and press “exit”.
NOTE: You cannot load empty settings.