cmotion cvolutionLCS - Focus Scale; Iris Scale

All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
68/112
4.16.1. Focus scale
■ In order to create a focus scale, move the scale controller to the innity position.
Press the MENU SELECT WHEEL to set the value.
■ The next value increment will be displayed automatically. Move the lens to match
this value. If the next suggested value does not exist on your lens, scroll through
the values using the MENU SELECT WHEEL until you nd a value which is also on
your lens. Align the lens to this value and press “sel” to conrm.
■ Continue with all focus values on your lens scale. Once nished with the nearest
focus value, press “done”.
Note: Upto 50 motor positions per lens can be stored for the focus
scale. By scrolling left or right using the select wheel, each set motor
position will be marked with a small arrow. In order to delete or change
the motor position, scrawl to the value to be edited and press “del” in
order to delete the motor position or simply overwriting the old one by
pressing “sel”.
4.16.2. Iris scale
■ In order to create an iris scale, move the scale controller to the closed iris position.