All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
32/112
3. System Setup
This section will guide you through the cvolution system setup. Starting with the camin then
proceeding to cvolution hand unit and cvolution zoom unit.
3.1. camin 3M/8M
3.1.1. Attaching camin to the Camera
Mount the Lens Motors and camin securely. The camin can be attached to the camera using
various fastening tools. The most popular are the cfast rod connector and the cfast-vlock;
which can be used with or without a cfastener.
Illustration shows camin 2M mounted with cfast-vlock and cfastener.
To Next Page
Loading...