cmotion cvolutionLCS - Attaching Cfast-Vlock; Releasing Cfast-Vlock; Mounting the Antenna

All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
33/112
3.1.2. Attaching cfast-vlock
■Use a No.2 Philipps screwdriver and the 4 supplied screws to attach the v-shaped
insert piece to the camin.
■If applicable: attach the cfastener to any rod 15-28 mm. Fasten securely!
■Gently slide the insert piece into the interlocking mechanism until you hear it click
and lock into place.
3.1.3. Releasing cfast-vlock
■Push and hold the release button.
■Slide the camin upwards.
3.1.4. Mounting the Antenna
■Locate the antenna port on the Motor side of camin 2M, 4M and 8M and the top
side of camin 3M.
■Insert the threaded end of the antenna and attach by turning it clockwise.
■Tighten securely.