cmotion cvolutionLCS - Delete Lens; Create Lens; Edit Lens

All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
75/112
4.18.6. Delete Lens
In order to delete a single lens le from the cvolution hand unit’s memory, proceed as follows:
- Press the MENU SELECT WHEEL twice to enter the Menu
- Select LENS, “Delete Lens”
- Select the lens le to be deleted and conrm twice by pressing “yes”
- Select “No” to cancel the procedure
4.18.7. Create lens
In order to create a lens le on the cvolution hand unit, please proceed as follows:
- Press the MENU SELECT WHEEL twice to enter the Menu
- Select LENS, “Create Lens”
For a detailed description on how to create a lens le, please refer to section 4.16 on page 66 of
this manual.
4.18.8. Edit Lens
In order to esit a lens le on the cvolution hand unit, please proceed as follows:
- Press the MENU SELECT WHEEL twice to enter the Menu
- Select LENS, “Edit Lens”
- Select the lens le to be edited and conrm by pressing “yes”
- Select “No” to cancel the procedure
For a detailed description on how to create a lens le, please refer to section 4.16 on page 66 of
this manual.
NOTE: A lens le which is loaded to the camin can not be edited and needs to be unloaded
before selecting the “Edit lens” function.
Only lens les created on the hand unit can be edited.
In order to unload a lens le, please refer to section 4.18.4. on page 72 of this manual.