cmotion cvolutionLCS - Setting Zoom Limits; Changing Zoom Motor Direction

All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
64/112
4.13.5. Setting Zoom Limits
Setting a zoom limit works in the same way as setting a limit on the knob and slider:
■Assign one of the user buttons to “LENS”
■Move the zoom motor to your desired starting position.
■Now hold the LENS button while zooming to your desired end position.
■Release the LENS button. On the cvolution zoom display, the limits will be shown
in the bar graph.
4.13.6. Changing Zoom Motor Direction
Direction can be changed through the zoom units menu.
■Go to the menu “MOTORS“ select the appropriate motor, then select the menu
“DIR X“ and set the direction as needed.