All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
63/112
markers quickly
In order to set a marker:
■assign a user button to MARKER
■move the zoom axis to the desired position using the joystick
■press and hold the MARKER button until a small arrow shows up on the display’s
bar graph
■move the zoom axis to the next desired position using the joystick
■press and hold the MARKER button until a small arrow shows up on the display’s
bar graph
you can set up to 3 markers
In order to jump from one set marker to another:
■press the MARKER button and the zoom moves to the rst marked position
quickly
■press the MARKER button again to move to the next marked position
Note: Once you reach the highes markered position and press the
MARKER button, the zoom will move to the lowest markered position
again
In order to erase the markers
■press the MARKER button until you have reached the desired marker position to
be erased
■press and hold the MARKER button until the small arrow disapears from the
display’s bar graph
■press the MARKER button again until you have reached the next desired marker
position to be erased
SPD UP
The SPD UP function allows you to increase the zoom speed
SPD DOWN
The SPD DOWN function allows you to decrease the zoom speed
To Next Page
Loading...