All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
61/112
Bright
Set the zoom display brightness to “MIN”, “MID” or “MAX”.
View
Select the data to be visualized on the zoom display.
“Scale” shows a graphical representation of the current scale and current controller position
only.
“Distance” displays the current distance value from the cnder or another range nder if present
in the system.
“ABS/SCA” displays the current absolute controller position in metric or imperial scale units.
“ABS ALL” displays all available lens data.
Motors
To assign motor functions (scale, ramp, torque or direction) if no camin is used and the zoom
unit is connected to the cforce motor daisy chain directly.
Select the motor to be congured.
“Scale” allows you to assign the motor axis to “FOCUS“ “IRIS“ or “ZOOM“
“Ramp“ allows you to set a motor ramp to “MIN”, “SHORT”, “LONG” or “MAX”
“Torque“ allows you to adjust motor torque to “WEAK“, “STRONG“ or “MAX“
“Dir X” allows you to change motor direction from “LEFT” to “RIGHT”
Buttons
Assign a user button function (ZAP, LENS, REC, RET, MARKER, SPD UP, SPD DOWN) to one
of the buttons (BUTTON 1, BUTTON 2, BUTTON UP, BUTTON DOWN).
To Next Page
Loading...