All content © 2017, cmotion GmbH. All specications subject to change without notice. http://www.cmotion.eu
2/112
Using this Guide
This manual is split in three parts. The rst introduces you to the cvolution lens control system,
explaining components and concepts. The second takes you step by step through the setup
of the system. The third part guides you through operation and menu options. The table of
contents provides a reference guide to specic sections of this user guide for quick information.
Note: Notes indicate important information related to the respective
sections of this user’s guide.
Warning: Warnings indicate important safety information. Ignoring
these could lead to equipment damage or injury.
All cmotion components are written in italics throughout this manual.
Cables
When a cable is referred to in this user’s manual, it is identied by its connectors. E.g. Fi 16p,
Le 4p. Connectors are manufactured by W. W. Fisher, Lemo or Hirose and are referred to as
Fi, Le and Hi respectively. The cable identication begins with the connector that is attached
to the cmotion product (camin) followed by the connector which is attached to non-cmotion
product or cmotion accessory. Each connector also takes reference from the number of pins it
has. E.g. Fi 16p, Hi 12p means that the cmotion connector is a 16pin Fischer and the other end
is a 12pin Hirose.
Cables may also be referred to by their commonly used names e.g. CBUS (Le 8p, Le 8p).
Occasionally, cable connectors are referred to as ‘m’ or ‘f’ to identify whether the connector is
male or female. For a full overview of cables, please download the cmotion cable guide from
www.cmotion.eu.
Necessary Tools
A 4mm Allen key may be required to complete steps laid out in the manual.
Frequently Used Terms
To Power Cycle: Turn your unit o and on again
To Next Page
Loading...