6-14 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments: Final approval required
Part Number: 120137-002 File Name: g-ch6 Server Configuration and Utilities Last Saved On: 12/10/99 12:26 PM
and Support Software CD also includes all the SCO UNIX device drivers for
your system.
Manual Installation
Alternatively, selecting the manual path after starting the Compaq SmartStart
and Support Software CD automatically creates the system configuration
partition server and allows you to use the SCO interview process. Depending
on your operating system, it may be necessary to use the Compaq Boot Time
Loadable Drivers (BTLD) diskette or the Compaq Host Bus Adapters (HBA)
diskette along with the Compaq Extended Feature Supplement (EFS) diskette
to install driver support. Drivers can be downloaded onto diskettes with tools
available on the Compaq SmartStart and Support Software CD. To create these
diskettes, boot the Compaq SmartStart and Support Software CD and follow
the instructions to create Supplemental Support Software diskettes.
One of the diskettes on the Compaq EFS contains a bootable documentation
diskette. Before attempting to install the SCO UNIX software, run this diskette
and read the README file for the Compaq EFS. This file instructs you on
how to use the BTLD or HBA diskettes along with the SCO installation media.
A third method is similar to the manual path method listed above. However,
you must run the Compaq System Configuration Utility to configure the
system, obtain the appropriate EFS for the SCO operating system release, and
follow the manufacturer’s installation instructions. Once again, depending on
the operating system, it may be necessary to use the Compaq Boot Time
Loadable Drivers (BTLD) diskette or the Compaq Host Bus Adapters (HBA)
diskette along with the Compaq Extended Feature Supplement (EFS) diskette
to install all the driver support. These utilities can be downloaded onto
diskettes with tools available on the Compaq SmartStart and Support
Software CD.
Creating Utility Diskettes
To create utility diskettes, boot the Compaq SmartStart and Support Software
CD and follow the instructions to create Supplemental Support Software
diskettes. One of the diskettes on the Compaq EFS contains a bootable
documentation diskette. Before attempting to install the SCO UNIX software,
boot this diskette and read the README file for the Compaq EFS. This file
instructs you on how to use the BTLD or HBA diskettes along with the SCO
installation media.
To Next Page
Loading...
Need help?
General
