Compaq PROLIANT ML370 User Manual

A-6 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: i-appa Regulatory Compliance Notices Last Saved On: 12/13/99 3:28 PM
Laser Devices
All Compaq systems equipped with a laser device comply with safety
standards, including International Electrotechnical Commission (IEC) 825.
With specific regard to the laser, the equipment complies with laser product
performance standards set by government agencies as a Class 1 laser product.
The product does not emit hazardous light; the beam is totally enclosed during
all modes of customer operation and maintenance.
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous radiation:
 Do not try to open the laser device enclosure. There are no user-
serviceable components inside.
 Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
 Allow only Compaq authorized service technicians to repair the laser
device.
Compliance with CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on
August 2, 1976. These regulations apply to laser products manufactured from
August 1, 1976. Compliance is mandatory for products marketed in the United
States.
Compliance with International Regulations
All Compaq systems equipped with laser devices comply with appropriate
safety standards including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the Compaq
supplied laser device.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English