Compaq PROLIANT ML370 User Manual

Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments: Final approval required
Part Number: 120137-002 File Name: g-ch6 Server Configuration and Utilities Last Saved On: 12/10/99 12:26 PM
Chapter 6
Server Configuration and Utilities
This chapter provides instructions for using Compaq System Configuration
Utilities, for using Compaq SmartStart, and for loading device drivers.
System Configuration Utility
Compaq System Configuration Utility performs a wide range of configuration
activities, including:
 Automatically configuring PCI plug-and-play boards
 Providing switch and jumper settings
 Resolving resource conflicts in memory, port addresses, and interrupt
requests (IRQ)
 Managing the installation of mass storage devices such as hard drives,
tape drives, and diskette drives
 Setting and storing Power-On features such as date and time
 Storing configuration information in nonvolatile memory
 Installing an operating system
 Running diagnostic tools such as TEST and INSPECT Utilities
If the SmartStart and Support Software CD is used the first time the server is
configured, the SmartStart program automatically creates a Compaq utility
partition and installs the System Configuration Utility and other Compaq
utilities in that partition.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English