Server Configuration and Utilities 6-15
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments: Final approval required
Part Number: 120137-002 File Name: g-ch6 Server Configuration and Utilities Last Saved On: 12/10/99 12:26 PM
Compaq-specific drivers either included with the EFS or packaged with SCO
media include:
Compaq Ethernet/Token Ring Adapter
Automatic Server Recovery-2
Compaq System Health
Compaq ProLiant ML370 Storage System
Compaq SCSI and Intelligent Disk Array
Compaq Fiber Storage Array Support
Compaq Remote Insight Board Support
Compaq System Utilities
Special Considerations
Review the README files on the Compaq SmartStart or EFS Diskettes or
CDs for additional details.
IBM OS/2 Device Drivers from Compaq
If you are using the Compaq NC3163 Fast Ethernet NIC Embedded 10/100
WOL network controller on a ProLiant ML370 server and you do not plan to
use the SmartStart installation process to setup your server, you must install
updated support software for your controller to connect properly to the
network.
Your server must have certain device drivers for some server options to
operate using IBM OS/2 Warp Server and Warp Server Advanced 4.0, IBM
OS/2 Warp Server Advanced 4.0 with SMP, IBM OS/2 Warp Connect 3.0, and
IBM OS/2 Warp 4.0. These drivers are located on the Compaq SmartStart and
Support Software CD you received with your server. If you use Compaq
SmartStart to install your operating system, these drivers are loaded
automatically.
Otherwise, you can use Compaq SmartStart to create IBM OS/2 Support
Software Diskettes (SSD) from Compaq to support a manual installation or
retail software installation of IBM OS/2. The installation diskettes can be
customized for OS installation on Compaq servers by using the CPQSETUP
utility on the IBM OS/2 SSD.
For more information on these drivers, run the VIEWME.EXE file in the root
directory of the IBM OS/2 SSD Diskette 1 from Compaq.
To Next Page
Loading...
Need help?
General
