Compaq PROLIANT ML370 User Manual

6-16 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments: Final approval required
Part Number: 120137-002 File Name: g-ch6 Server Configuration and Utilities Last Saved On: 12/10/99 12:26 PM
Compaq SmartStart Installation
If you use Compaq SmartStart to install the OS/2 operating system, the drivers
are installed automatically.
Manual Installation
Install the operating system and configure the server without Compaq
SmartStart:
1. Insert the Compaq SmartStart and Support Software CD into the
CD-ROM drive and start the server.
2. Select Manual Installation.
3. Follow the instructions from the CD for your operating system.
4. If you have already created the SSD diskettes as part of your manual
Installation process, skip to Step 8.
5. Insert the Compaq SmartStart and Support Software CD into the
CD-ROM drive of a system running Microsoft Windows 95 or
Microsoft Windows NT 4.0.
6. In the Diskette Builder Software selection screen, choose Compaq
IBM OS/2 NIC Support Software and Compaq IBM OS/2 Support
Software (SSD).
7. Follow the instructions to create the appropriate diskettes.
8. Insert the diskette titled “Compaq IBM OS/2 Support Software Diskette
for Novell products, Utilities-1” into the A: drive.
9. Change path to A:
10. Type VIEWME at the command prompt.
11. Follow the directions to install Compaq system and storage drivers and
Compaq utilities on your Compaq server.
12. Follow the instructions given in the corresponding section to install
Compaq NIC drivers on your Compaq server.
NOTE: If you do not have easy access to a Windows 95 or Windows NT server, you can
start the server now running IBM OS/2 with the SmartStart and Support Software CD and
then choose the Support Software option to create the SSD diskettes.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English