3-4 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: d-ch3 Installing the Rack Model Last Saved On: 12/13/99 3:43 PM
Server Warnings and Precautions
22.6 kg
50 lb
WARNING: This product is very heavy. To reduce the risk of
personal injury or damage to the equipment:
Remove all pluggable power supplies and modules to reduce
the weight of the product before lifting it.
Observe local occupational health and safety requirements and
guidelines for manual material handling.
Get help to lift and stabilize the product during installation or
removal, especially when the product is not fastened to the
rails.
Use caution when installing the product in or removing the
product from the rack; the product will be unstable when not
fastened to the rails.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
hot-plug drives and the internal system components to cool before touching any
equipment surface.
WARNING: To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
Unplug the power cord from each power supply to disconnect power to the
equipment.
CAUTION: Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS). This device
protects the hardware from damage caused by power surges and voltage spikes
and keeps the system in operation during a power failure.
CAUTION: The rack server must always be operated with the system unit cover
on. Proper cooling will not be achieved if the system unit cover is removed.
To Next Page
Loading...
Need help?
General
