Compaq PROLIANT ML370 User Manual

Installing Hardware Options 4-17
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: e-ch4 Installing Hardware Options Last Saved On: 12/10/99 12:22 PM
Installing Additional Mass Storage
Devices
The server is shipped standard with a total of 10 drive bays for installing
additional internal mass storage devices. Non-SCSI devices including
CD-ROM drives and SCSI devices such as tape or hard drives can be installed
in the vacant non-hot-plug, removable media drive bays.
Six 1-inch SCSI hard drives can be installed in the standard hot-plug drive
cage (SCSI IDs 0-5). The orientation of the rack model is different from the
tower model shown in the figure below.
COMPACT
A
B
C
D
45 3210
Figure 4-15. SCSI ID locations (tower server)
NOTE: SCSI devices connected on port 1 of the Dual Channel Wide Ultra2 SCSI Controller
may be either internal or external drives, but not both.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English