Compaq PROLIANT ML370 User Manual

2-4 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: c-ch2 Installing the Tower Model Last Saved On: 12/10/99 12:27 PM
In addition to these supplied materials, you may need the following items:
 T-15 Torx screwdriver
 Options to be installed such as expansion boards, monitors,
uninterruptible power supply (UPS), memory, or Integrated Smart Array
Controller
 Application software diskettes
 Operating system and application software
Installing Expansion Boards and Other
Major Hardware Options
See Chapter 4, “Installing Hardware Options,” for instructions on installing
PCI expansion boards and other major hardware options.
The following major hardware options are available for the ProLiant ML370
server and may be obtained from your local Compaq authorized reseller:
 Hot-plug hard drives
 Memory
 Additional processor and Processor Power Module (PPM)
 SCSI controller boards
 Tower-to-rack conversion kit
 Tape drives
 Integrated Management Display
 Remote Insight Board (PCI)
 Hot-plug redundant power supply
 Integrated Smart Array Controller upgrade
CAUTION: Remove the AC power cord from the server before installing options
such as PCI expansion boards. Installing expansion boards with the AC power
cord connected to the server may result in damage to the system.
This guide covers only the installation of a typical expansion board, hard
drive, memory, SCSI devices, integrated controller, and a second processor.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English