Installing the Tower Model ProLiant ML370 2-7
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: c-ch2 Installing the Tower Model Last Saved On: 12/10/99 12:27 PM
1. Slide the power switch cover plate
away from the power switch.
2. Press the power switch
to turn on the server.
2
1
Figure 2-2. Turning on power to the server
Configuring the Server with SmartStart
SmartStart is the intelligent way to configure the server and to load system
software, thereby achieving a well-integrated server and ensuring maximum
dependability and supportability. The SmartStart and Support Software CD
contains the Compaq System Configuration Utility and ROMPaq. To use the
SmartStart and Support Software CD, refer to the Server Setup and
Management pack shipped with your server.
The Compaq System Configuration utility performs a wide range of
configuration activities including:
Configuring PCI boards automatically
Providing switch and jumper settings
Resolving resource conflicts in memory, port addresses, and interrupts
Managing the installation of memory, processor upgrades, array
controllers, and mass storage devices such as hard drives, tape drives,
and diskette drives
Setting and storing Power-On features such as date and time
Storing configuration information in nonvolatile memory