Compaq PROLIANT ML370 User Manual

2-8 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: c-ch2 Installing the Tower Model Last Saved On: 12/10/99 12:27 PM
 Assisting in the installation of the operating system
 Assisting in the running of diagnostic tools such as the TEST and
INSPECT utilities
The first time the server is configured, the SmartStart program automatically
creates a system partition and installs the configuration utility and other
Compaq utilities into that partition.
Install the SmartStart and Support Software CD:
1. With your computer turned on, open the removable media access door
by pressing on the left side of the door
 as shown below. Swing the
door open
 to access the CD-ROM drive.
2
1
Figure 2-3. Opening the removable media access door
2. Locate the SmartStart and Support Software CD in the Server Setup and
Management pack.
3. Insert the SmartStart and Support Software CD into the CD-ROM drive.
NOTE: Handle the CD by its edges rather than by the flat surfaces of the disk.

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English