Compaq PROLIANT ML370 - Page 164

C-2 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: k-appc Installing a New Battery Last Saved On: 12/10/99 12:24 PM
4. Locate the battery holder on the system board.
5. Remove the old battery from the battery socket as shown below.
Figure C-1. Removing the battery
6. Install the new battery.
7. Replace the access panel and power cord.
8. Turn on the server.
9. Run the System Configuration Utility to reconfigure the system.