Compaq PROLIANT ML370 User Manual

Installing the Rack Model ProLiant ML370 3-29
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: d-ch3 Installing the Rack Model Last Saved On: 12/13/99 3:43 PM
Use the following procedure to connect the power cord and peripheral devices:
1. Plug the power cable and other peripheral cables into the server.
2. If you install a switchbox in the rack, route the CPU-to-switchbox cables
to the switchbox.
Figure 3-23. Routing cables through the cable management arm and cable
support
3. Bundle all of the cables, including the power cable, together and tie
them to the cable management arm.
4. To route cables to the other side of the rack, attach the bundled cables to
the cable support and run them to the opposite cable channel.
Figure 3-24. Routing and securing the cables

Compaq PROLIANT ML370 Specifications

General

Brand	Compaq
Model	PROLIANT ML370
Category	Server
Language	English