D-Link xStack DGS-3120 Series - Ospf Neighbor Table

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
204
Click the <<Back button to return to the previous window.
OSPF Neighbor Table
This window is used to display OSPF-neighbor information on a per-interface basis.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Neighbor Table, as shown below:
Figure 5-56 OSPF Neighbor Table window
The fields that can be configured are described below:
Parameter Description
Neighbor IP Address
Enter the IP address of the neighbor router.
Click the Find button to find the specified entry.
Click the View All button to view all the entries.
OSPF Virtual Neighbor Table
This window is used to display OSPF-neighbor information of OSPF virtual links.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Virtual Neighbor Table, as shown
below: