D-Link xStack DGS-3120 Series - RMON Settings; SNMP Community Encryption Settings; SNMP Community Masking Settings

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
68
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
RMON Settings
This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for
the SNMP function on the Switch.
To view the following window, click Management > SNMP Settings > RMON Settings, as shown below:
Figure 3-46 RMON Settings window
The fields that can be configured are described below:
Parameter Description
RMON Rising Alarm Trap
Enable this option to use the RMON Rising Alarm Trap feature.
RMON Falling Alarm Trap
Enable this option to use the RMON Falling Alarm Trap feature.
Click the Apply button to accept the changes made.
SNMP Community Encryption Settings
This window is used to enable or disable SNMP community encryption state.
To view the following window, click Management > SNMP Settings > SNMP Community Encryption Settings,
as shown below:
Figure 3-47 SNMP Community Encryption Settings window
The fields that can be configured are described below:
Parameter Description
SNMP Community
Encryption State
Click to enable or disable the encryption state on SNMP community string.
Click the Apply button to accept the changes made.
SNMP Community Masking Settings
This window is used to configure a secure method to create a SNMP community string.
To view the following window, click Management > SNMP Settings > SNMP Community Masking Settings, as
shown below: