D-Link xStack DGS-3120 Series - Page 500

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
490
3. swTemperatureCurrent
swLowTemperatureRecover
Low Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
1.3.6.1.4.1.171.12.11.2.2.4.0.4
agentFirmwareUpgrade
This trap is sent when the process of upgrading the
firmware via SNMP has finished.
Binding
1. swMultiImageVersion
1.3.6.1.4.1.171.12.1.7.2.0.7
agentCfgOperCompleteTrap
The trap is sent when the configuration is
completely saved, uploaded or downloaded.
Binding
1. unitID
2. agentCfgOperate
3. agentLoginUserName
1.3.6.1.4.1.171.12.1.7.2.0.9
swPowerFailure
Power Failure notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.2
swPowerRecover
Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.3
swUnitInsert
Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.1
swUnitRemove
Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.2
swUnitFailure
Unit Failure notification.
Binding
1. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.3
swUnitTPChange
The stacking topology change notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.4
swUnitRoleChange
The stacking unit role change notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.5
lldpRemTablesChange
A lldpRemTablesChange notification is sent when
the value of lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to trigger
LLDP remote systems table maintenance polls.
Binding
1. lldpStatsRemTablesInserts
2. lldpStatsRemTablesDeletes
3. lldpStatsRemTablesDrops
4. lldpStatsRemTablesAgeouts
1.0.8802.1.1.2.0.0.1
lldpXMedTopologyChangeDetected
A notification generated by the local device sensing
a change in the topology that indicates that a new
remote device attached to a local port, or a remote
device disconnected or moved from one port to
another.
Binding
1. lldpRemChassisIdSubtype
2. lldpRemChassisId
3. lldpXMedRemDeviceClass
1.0.8802.1.1.2.1.5.4795.0.1
swDdmAlarmTrap
The trap is sent when any parameter value
exceeds the alarm threshold value or recover to
normal status depending on the configuration of
the trap action.
Binding
1. swDdmPort
2. swDdmThresholdType
1.3.6.1.4.1.171.12.72.4.0.1