D-Link xStack DGS-3120 Series Reference Guide

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
493
1.0.8802.1.1.2.1.2.4
1.0.8802.1.1.2.1.2.5
vrrpTrapNewMaster
The newMaster trap indicates that the sending
agent has transitioned to 'Master' state.
Binding objects:
(1) vrrpOperMasterIpAddr
1.3.6.1.2.1.68.0.1
vrrpTrapAuthFailure
A vrrpAuthFailure trap signifies that a packet has
been received from a router whose authentication
key or authentication type conflicts with this
router's authentication key or authentication type.
Implementation of this trap is optional.
Binding objects:
(1) vrrpTrapPacketSrc
(2) vrrpTrapAuthErrorType
1.3.6.1.2.1.68.0.2
pimNeighborLoss
A pimNeighborLoss notification signifies the loss of
an adjacency with a neighbor. This notification
should be generated when the neighbor timer
expires, and the router has no other neighbor on
the same interface with the same IP version and a
lower IP address than itself.
This notification is generated whenever the counter
pimNeighborLossCount is incremented, subject to
the rate limit specified by
pimNieghborLossNotificationsPeriod.
Binding objects:
1. pimNeighborUpTime
1.3.6.1.2.1.157.0.1
pimInvalidRegister
A pimInvalidRegister notification signifies that an
invalid PIM Register message was received by this
device.
This notification is generated whenever the counter
pimInvalidRegisterMsgsRcvd is incremented,
subject to the rate limit specified by
pimInvalidRegisterNotificationPeriod.
Binding objects:
1. pimGroupMappingPimMode
2. pimInvalidRegisterAddressType
3. pimInvalidRegisterOrigin
4. pimInvalidRegisterGroup
5. pimInvalidRegisterRp
1.3.6.1.2.1.157.0.2
pimInvalidJoinPrune
A pimInvalidJoinPrune notification signifies that an
invalid PIM Join/Prune message was received by
this device.
This notification is generated whenever the counter
pimInvalidJoinPruneMsgsRcvd is incremented,
subject to the rate limit specified by
pimInvalidJoinPruneNotificationPeriod.
Binding objects:
1. pimGroupMappingPimMode
2. pimInvalidJoinPruneAddressType
3. pimInvalidJoinPruneOrigin
4. pimInvalidJoinPruneGroup
5. pimInvalidJoinPruneRp
6. pimNeighborUpTime
1.3.6.1.2.1.157.0.3
pimRPMappingChange
A pimRPMappingChange notification signifies a
change to the active RP mapping on this device.
This notification is generated whenever the counter
pimRPMappingChangeCount is incremented,
subject to the rate limit specified by
pimRPMappingChangeNotificationPeriod.
Binding objects:
1. pimGroupMappingPimMode
2. pimGroupMappingPrecedence
1.3.6.1.2.1.157.0.4
pimInterfaceElection
A pimInterfaceElection notification signifies that a
new DR or DF has been elected on a network.
This notification is generated whenever the counter
pimInterfaceElectionWinCount is incremented,
subject to the rate limit specified by
pimInterfaceElectionNotificationPeriod.
Binding objects:
1. pimInterfaceAddressType
2. pimInterfaceAddress
1.3.6.1.2.1.157.0.5
swDot1xLoggedSuccess
The trap is sent when an 802.1X client pass the
1.3.6.1.4.1.171.12.30.11.1.0.1

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)