ALLISON 1000 & 2000 AUTOMATIC GEARBOXES
4-2
©
200508
Removal and installation
7
ΛΦ45/55 series
3
Installing gearbox assembly
1. When installing the gearbox, apply a small
amount of grease to the nose of the torque
converter to prevent noise after fitting. See
"Technical data".
2. If necessary, fit the PTO.
3. Fit the prop shaft.
4. Fit the wiring harness connectors.
5. Fit the oil pipes from and to the oil cooler.
6. Fit and adjust the selector cable. See
"Inspection and adjustment".
7. If necessary, fit the oil filler pipe.
8. Fill the gearbox; see "Draining and filling".
W 3 03 100
DAF LF Gearboxes and Clutch Service Manual
To Next Page
Loading...
Need help?
General
